Show Info

Date: 2012/8/29-2012/9/1

Venue:

Taipei World Trade Center NanGang Exhibition Hall

Organizer:

Taiwan Society of Manufacture Engineering and Automation Technology
Economic Daily
Chan Chao International Co., Ltd.

Official Site

Featured Suppliers

KUKA AUTOMATION TAIWAN LTD. Booth No : J306

...more

Home
Products
4-axes Motion Control Card with Advanced Encoder Counter Function (2 8-bit DA's)

Enlarge

4-axes Motion Control Card with Advanced Encoder Counter Function (2 8-bit DA's)

Modeeel: MPC-3035/L

Industry: Automatic/Industrial Machines & Equipments / Automated Machinery & Equipments / Automatic Control Systems

Supplier; JS Automation Corp

Booth No: I1427

Characteristics

*Same basic function as MPC-3034
*High noise immunity with magnetic/photo-coupler isolation
*2MHz max. Quadrature input rate
*Two 32-bit counters
*Quadrature, pulse/direction and up/down counting
*Programmable multiply rate at X1, X2, X4
*Load preset value to counter by software trigger
*Multiple counter reset (homing) modes
*Differential or single-end input signal
*Auto increment compare mode
*FIFO compare mode (X axis)
*Line driver type compare output
*Programmable duration for Compare out
*Interrupt on FIFO alarm (X axis), compare equal, borrow, carry and counter clear
*2 8-bit 0~10V PWM DA (MPC-3035 Only)

Specifications

Motion
*Max Pulse Rate : 6553500 pps (with magnetic-coupler isolation)
*Pulse Output Mode :
Single phase : CLOCK, DIR
Dual phase : CW, CCW
*Acceleration / Deceleration Mode : linear, S-curve
*Homing Mode : 14 types
*Encoder Up / Down Counter : 4 28-bit counter
*Pulse Handle Up / Down Counter : 4 28-bit counter
*Linear Interpolation : any 2 up to 4 axis
*Circular Interpolation : any 2 axes
Counter(daughter board)
*Number Of Axes : 2, independent
*Maximum Quadrature Input Frequency : 2MHz
*Maximum Input Pulse Frequency : 4MHz
*Encoder Type : Single-end or differential
*Input Pulse Multiple Rate : X1, X2, X4 programmable (quadrature signal only)
*Counter Length : 32-bit
*Counter Mode : (QUADRATURE), (CLOCK / DIRECTION), (UP CLOCK / DOWN CLOCK)
*Sample Clock Frequency : 8MHz
*Software Homing (Reset) Counter Method : one software trigger mode
*Hardware Homing (Reset) Counter Method : five H/W trigger mode
*Compare Mode : one-time, auto increment, FIFO
*Compare Method : equal, equal or less then, equal or greater than
*External Gate : IN0, IN1
*External Gate Polarity : programmable
*Mask Off Segment : 3
*Mask Off Region : exterior or interior
*FIFO Depth : 1023 (X, Z axis)
*Compare Out One Shot Duration : 1 ~ 16777215us
Digital I/O
*Motion Specific Input : SRDY, ALM, LS+, LS-, SD, ORG, PCS, LTC, INP per axis, EMG per card
*Motion Specific Output : CMP, SVON, ERC, FIN per axis
*General Input : INP per axis
*General Output : FIN per axis
*TTL I/O : 2 nibble configurable TTL I/O
*General Purpose Differential Input : 1-bit per axis (MPC3035D)
Analog Output
*PWM DA : 8-bit, unipolar 0 ~ 10Vdc(MPC-3035 only)
General
*Card ID : 16 locations set by rotary switch
*Insulation Resistance : 100M Ohm (min) at 1000Vdc
*Isolation Voltage : 2500Vac 1Min
*I/O Connector :
2 68-pin female mini scsi connector for motion control function (JF1/JF2)
1 D-type 25P for MPC3035D counter function (JM1)
1 D-type 25P for pulse handler related function (JM3)
*Power Requirement : 24Vdc ± 4Vdc
*Operation temperature : 0°C ~ +70°C
*Storage temperature : -20°C ~ +80°C
*Operation humidity : 5% ~ 95% RH, non-condensing
*Dimensions : 175(W) * 122(H) mm, 6.9(W) * 4.8(H) in