Our Products

Contact Information

Online Inquiry

No.57, Aly. 150, Ln. 516, Sec. 2, Sinan Rd., Wurih Dist., Taichung City 414, Taiwan

Tel: 886-4-23354645

Fax: 886-4-23352545

...more

Home
Products
ENGINE LATHE SERIES

Enlarge

ENGINE LATHE SERIES

Model: CH430/500

Category: Machine Tools / Lathes / High Speed Precision Lathes

Online Inquiry

Characteristics

‧Ground and hardened gears and bed way
‧3 precision bearings supported spindle driven by single speed motor delivers full power at all 12 speeds
‧Dual gear box for easy switch of inch and metric threads
‧Mechanical overload deviCe in Carriage
‧Auto spray and forced feed lube system in headstock and carriage
‧Low voltage controls for extra safety operation

Specifications

STANDARD ACCESSORIES ................................................................................	OPTIONAL ACCESSORIES ..........................................................................................................
Main motor Centre sleeve ( MT 4,6 ) Coolant equipment Tool box with tool kits Square tool post with wrench	3 jaw universal chuck Taper attchment 4jaw independent chuck Splash guard Drive plate Face plate Work light / quartz work light

SPECIFICATIONS		430X750 (17X30")	430X1000 (17X40")	430X1500 (17X60")	430X2000(17X80")	500X1000 (20X40")	500X1500 (20X60")
General Capacity	Center height	215mm (8-1/2")				250mm (10")
	Swing over bed	430mm (17")				500mm (20")
	Swing over gap	660mm (26")				730mm (28")
	Swing over cross slide	245mm (9-5/8")				280mm (11")
	Distance between centers	695mm (27.4")	935mm (36.8")	1430mm (56.3")	1930mm (76")	935mm (36.8")	1430mm (56.3")
Main Spindle	Spindle nose	A 1-6 or D1-6
	Spindle bore diameter	58mm (2-1/4")
	Taper of spindle bore	MT6
	Taper of center	MT4
	Spindle speeds	50-1800rpm (12 steps)
Carriage	Cross slide travel	220mm (8-5/8")				250mm (10")
	Compound rest travel	180mm (7")
	Max. size cutting tool	25 X 25mm (1"X1")
Tailstock	Spindle diameter	58mm (2-1/4")
	Spindle travel	150mm (6")
	Taper of center	MT4
Bed	Bed width	300 mm (11-7/8")
	Bed length	1600mm (63")	1860mm (73")	2380mm (93")	2880mm (113")	1860mm (73")	2380mm (93")
Threading &Feeding	System	Metric system				Inch system
	Pitch of leadscrew	35Ø , 6 mm/pitch				4TPI
	Metric pitch	0.5-0.7 mm/pitch (22 kinds)
	Inch pitch threads	4-56 TPI (36 kinds)
	Module pitch threads	0.5-3.5 M.P. (12 kinds)
	Diametral pitch threads	8-56 D.P. (21 kinds)
	Range of longitudinal feeds	0.05-0.70 mm/rev.　　　0.002-0.028"/rev.
	Range of cross feeds	0.025-0.35 mm/rev. 　　　0.001-0.014"/rev.
Power	Main drive motor	5HP				7.5HP
	Coolant pump motor	1/8 HP
Floor Dimension		1900X720 mm	2150X720 mm	2650X720 mm	3150X720 mm	2150X720 mm	2650X720 mm
Net weight		1400 kgs	1500 kgs	1700 kgs	1900 kgs	1700 kgs	1900 kgs
Gross weight		1600 kgs	1700 kgs	1900 kgs	2100 kgs	1900 kgs	2100 kgs
Packing size approx. ( L X W X H )		2100/2300/2800/3300X1000X1640mm				2300/2800X1000X1720 mm

Page Top