Our Products
- Heat Exchangers (3)
- Other Machinery (2)
- Copper (Brass) Products (1)
- Stainless Steel Tube Mills (1)
- Solvent Reclamation Devices (1)
Contact Information
168 Jixin Road, Minhang District, Shanghai, China
Tel: 86-021-54801200
Fax: 86-021-54801200808
Twisted tube with Stainess steel
Model: Spec¡G∅19¡F∅25¡F∅32
Category: Automatic/Industrial Machines & Equipments / Chemical Industry Machines / Solvent Reclamation Devices
Characteristics
Twisted tube is a kind of enhanced heat transfer tubes that firstly presented by Swedish Alards Company, and then improved by the USA¡¦ Koch Heat Transfer Company, LP¡C
Structure and manufacture of twisted tube¡G
The structure feature of Twisted tube is that every cross section is an oval, when assembled heat exchangers they can be mixed bundles (that is, the mix of Twisted tube and bare tube), and also can be a pure Twisted tube bundle¡C
The manufacturing process of Twisted tube includes:"partial pressure" and "distortion". The tube¡¦s cross section is nearly an ellipse, of which the ratio of long axis and short axis is designed according to the flow velocity in tubes passes and shell passes of heat transfer tubes. When the flow rate in tube pass is low, the ratio of the long axis and short axis shall be increased, or the flow surface shall be reduced in order to increase the flow rate¡C
Enhanced heat transfer principles of twisted tube¡G
The unique structure of Twisted tube can make the flow in tube pass and shell pass in the spiral motion at the same time, by this way it enhanced the turbulent intensity. The heat transfer coefficient of the Twisted tube is 40% higher than the normal one, but the pressure drop are almost same¡C
Advantages of heat transfer with twisted tube¡G
1¡BLower pressure drop No baffle plate, lower pressure drop in the shell pass¡C
2¡BHigher heat transfer efficiency It can increase the turbulent intensity, make the shell flow velocity and the direction change regularly, and enhance the mixture in lengthways¡C
3¡BLess deposit No blind zone in the shell¡C
Specifications
Tab. Steel tube material
Type |
No. |
Standard |
Supply condition |
Carbon steel |
10¡B20 |
GB/T 9948-2006 GB/T 6479-2000 GB/T 8163-2000 |
Annealed condition |
Austenitic stainless steel |
0Cr18Ni9 |
GB/T 13296-2002 GB/T 14976-2002
|
Pickling & passivation |
00Cr19Ni10 |
|||
0Cr18Ni10Ti |
|||
0Cr17Ni12Mo2 |
|||
00Cr17Ni14Mo2 |
Featured products