Our Products
- CNC Milling Machines (5)
- CNC Lathes (3)
- Other Machinery (2)
Contact Information
No.20, Ln. 505, Side Rd., Wufeng Dist., Taichung City 413, Taiwan
Tel: 886-4-23328098
Fax: 886-4-23328099
Powerful Flat Bed CNC Lathes
Model: DL-600 / 720
Category: Machine Tools / Lathes / CNC Lathes
Characteristics
This m/c is a powerful & precision CNC lathes and bed is adopted hi-rigidity rib structure designs & coupled with hi-tensile meehanite castiron which are annealed treatment to eliminate internal residual stress, the bed way are high frequency heat treated, precision ground etc.,
Three point support on the spindle and inspected by dynamic balancing, the spindle gear is a module 3 & wided that is very suitable heavy duty cutting and being with 3 steps speed shifting, Especially, that can be full power output even as the spindle speed at low gear, large cutting force.
The carriage is coated with Turcite-B which provide low friction & vibration and ensure smooth movement & accuracy.
Adopted central lubricating system which can be lubricated slide way & ball screw, but the headstock is adopted forced lubricating & oil bathed combined.
Manual tailstock and coupled with 1:1 & 1/4:1 feed shifting.
The visual window of sliding safety door be adopted the reinforced glass at inner layer and out layer for polycarbonate which can be protected the failured workpieces, hi-safety.
Specifications
Item / Model |
Unit |
DL-600 |
DL-720
|
||
WORKING CAPACITY |
|||||
Swing over bed |
mm |
610 |
720
|
||
Swing over cross slide |
mm |
360 |
460
|
||
Swing over gap |
mm |
790 |
900
|
||
Dist. Between centers |
mm |
1100/1600/2100 |
3100/4100
|
1100/1600/2100 |
3100/4100
|
Width of bed |
mm |
410 |
|||
HEADSTOCK |
|||||
Spindle bore |
mm |
@Φ 83 / Φ 105@/@ Φ 130 @@@ @/ @Φ 160 |
|||
Spindle nose |
|
A2-8 or D1-8@ / @A2-11 or D1-11 @/@A2-11 |
|||
Range of spindle speed |
rpm |
@@40~2000@@/@ 40~1500@@@/ @40~1000 | |||
No. of spindle speed |
|
@@@@3 @@@@@@@ / @1
|
|||
CARRIAGE |
|||||
Cross travel ] X axis ^ |
mm |
450 |
|||
Longitudinal travel |
mm |
975/1475/1975 |
2975/3775
|
975/1475/1975
|
2975/3775
|
AC servo motor |
kw |
X: 1 @Z: 2 |
|||
Rapid feed |
m/min |
X: 7@Z: 10 |
X: 7@Z: 8
|
X: 7@Z: 10
|
X: 7@Z: 8
|
Range of feeds |
mm/rev. |
X / Z: 0.001~500 |
|||
TURRET |
|||||
No. of tools |
|
H4 / V8 |
|||
Tool size |
mm |
25 |
|||
TAILSTOCK |
|||||
Quill dia. |
mm |
@@@@Φ 80 / Φ 105 ] opt. ^ |
|||
Quill stroke |
mm |
180 |
|||
Tailstock taper |
|
MT #5 |
|||
MOTOR |
|||||
Mainspindle motor |
HP |
@@@@20 / 25 ] opt. ^ |
|||
Coolant pump motor |
HP |
1 / 4 |
|||
Lubricating pump |
HP |
1 / 16 |
|||
BALL SCREW |
|||||
X axis |
|
Φ 25 × 5 × C5 |
|||
Z axis |
|
Φ 50 × 10 × C5 |
|||
CONTROLLOR |
|||||
Compatiable model |
|
Fanuc / Mitsubishi / Fagor / Anilam |
|||
Comtrollable axis |
|
2 |
Featured products