Our Products

 

• Shearing Machines (5)
• Bending Machines (5)

 

Contact Information

 

Online Inquiry

 

Pingqiao development zone,bowang town ,maanshan city,anhui provice

Tel: 86-555-6766556

Fax: 86-555-6767858

...more

• Home
• Products
• hydraulic NC guillotine shearing machine

 

hydraulic NC guillotine shearing machine

 

Model: QC11Y-17X6000

Category: Machine Tools / Metal Forming Machine Tools / Shearing Machines

 

Online Inquiry

 

 

Characteristics

 

1. The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high frequency vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on the left and right columns (wallboard).
2 .Tool carrier for welded steel plate box-type structure, has a good rigidity, high-frequency vibration to eliminate internal stress, through the rear pivot point gap adjustment device for the center, and can quickly adjust the blade gap. Three-point support rolling clamping rail, and to maintain good accuracy, the tool carrier running smoothly, and can quickly adjust the blade gap.
3 hydraulic guillotine structure, upper tool carrier with a return device, using accumulator type, fast return speed. Three-point rolling bearing clamping linear guides, to maintain good accuracy, tool carrier running smoothly, and can quickly adjust the blade gap.
4 Tandem cylinder structure, synchronization performance, and the shear angle can be adjusted, high shear quality.
5 Tool carrier stroke can be adjusted in order to improve production efficiency.
6. Upper tool carrier to introversion structure, convenient cut plate down, to improve the accuracy of the cut plate.
7. Rectangular blade, four blade edges can be used, long service life.
8. Jog, single inferior operating functions, commissioning, use, and easy maintenance
Hydraulic system using integrated logic circuit, through the sequence valve control and smooth movement, low noise, simple to maintain.
10 Imported seal ring professionally produced fuel tank control the operation of the blade.
11 pressing device when the sheet is not usual, can be free to expand and discuss pressed on the sheet. By the installation of the front of the rack supporting plate on a plurality of pressing cylinder consist of, the overall circuit and independent parallel pressing cylinder. Into the oil pressure feed fuel tank, the head of the binder pressure to overcome the pressure of relay spring pressed sheet metal, when shear completed, with the help of relay spring relay reset.
12 through potentiometer to control certain extent cut, shear adjustable stroke.
13 The shear times by counter control.
14 electrical control is centralized and reliable, as follows:
Power facilities are located within the body, through the control panel button operation to control and achieve.
Has a foot switch, through its direct clipping action, and convenient.
Motor overload and short circuit protection, through the air switch.
14 safe and reliable hydraulic system
14 upper and lower knife using 6CrW2Si, high quality materials, and all heat-treated, to ensure that it has sufficient hardness and long service life.
14 Roller working table, to facilitate feeding, and to ensure that the work piece in the run-time is not scratched.

 

Featured products