Specifications

WA heavy duty slurry pumps are cantilevered, horizontal,natural rubber or hard metal lined centrifugal slurry pumps.They are designed for the handling abrasive high density slurries in the metallurlurgical, mining, coal, power, building material and other industrial departments, etc..
If the pumps needed to be installed in series, please let us know when contact us.
 
Features

1. Double casings design centrifugal slurry pump, wide passage for solids;
2. Bearing assembly & frame: Both standard & high capacity typies available.  A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy duty roller bearing are housed in a removable bearing cartridge. Pump body is fastened with the frame by minimum bolts. Impeller adjustment is provided in a convenient position below the bearing assembly. 
3. Impeller & liner material: high chrome white iron, rubber, etc.
4. High efficiency impeller available: up to 86.5% for certain type
5. Interchangeable wet parts material: High chrome alloy metal: PH: 5-12; natural rubber: PH: 4-12;
6. Shaft seal: Packing seal, centrifugal seal, mechanical seal; 
7. Discharge branch: 8 positions in each 45°;
8. Driving type: V-belt, flexible coupling, gearbox, hydraulic coupler, etc..
 
Applications

Mill discharge
Ni acid slurry
Coarse sand
Coarse taillings
Phosphate matrix
Minerals concentrate
Heavy media
Sugar beet
Dredging
Bottom/Fly ash
Lime grinding
Oil sands
Mineral sands
Fine taillings
Slag granutation
Phosphoric acid
Coal
Flotation
Process chemical
Phosphoric acid
 
Specifications

Pump range: 25mm to 450mm (1’’ to 18’’)
Capacity: 4-5400m³/h
Head: 5-118m
Wet part material commonly is 27% Cr white iron alloy or rubber
Other material can be produced as per your specific application.