Our Products
Contact Information
Torch Development Zone
Tel: 86-760-88588917
Fax: 86-760-88583990
Countersink Machine for Feeding and Biomass Pellet Dies
Model: MLT-DJ550F/W
Category: Automatic/Industrial Machines & Equipments / Automated Machinery & Equipments / Automatic Control Systems
Characteristics
Chamfering and countersink on series of feeding and biomass pellet ring dies inner trumpet type holes and inner cone reaming.
Specifications
Countersink Machine for Feeding and Biomass Pellet Dies
This machine is used on biomass pellets and bigger hole diameter product and feeding ring die
This drilling machine is suitable for holes machining operations such as drilling, countersinking and counter boring on torus
Depth of hole can be adjusted at random
Equipment main feature:
- High-automation, easy hole-machining operation
- Low consumption on electricity
- Low production cost (one labor can run over 10 such drilling machines)
- If the depth of the pressure-relief vent at both ends of the ring-die are different, the depth can be set in this system in advance then this drilling machine can operate to this depth automatically
- The number of holes can be set at random but holes will evenly distribute on the circle of the ring-die's surface
- Those holes on the odd row and the even row will automatically mismatch
- The wear detection on main-axis torque and alarm limitation can be set at will, the wear on drill head can be monitored at any time thus it can effectively prevent drill-head breaking unexpectedly
- During drilling machine operates, the falling speed/rotate speed of drill chuck and indexing speed of universal indexing head can be adjusted at will
- The falling depth of drill chuck can be set at will; the semi-finished holes can be conveniently improved by hand
- With the alarm detection function, the machine greatly shortens invalid operation time when the drill-head is broken
- Pause/start at any time, unnecessarily point to the hole
- Memory function when power-off
Service item:
1. Machine warranty period is 12 months once the customer receives the machine
After 12 months, we may answer the customer's question on line or by e-mail within 24 hours
2. Mltor will prepare one more set of quick-wear components with the machine for the customer
3. Mltor will not provide or change any part or component for free if the customer damages them abnormally
Customer needs to purchase them separately
4. Mltor will afford the customer's technician local transportation, accommodation and catering cost when the customer's technician comes to Mltor factory to have a train or inspects the machine before the machine delivery
Customer will afford their technician traveling cost
5. In the warranty period, if the customer requests Mltor engineer to support in foreign country, Mltor will support to check equipment and train the customer technician for free but the customer needs to afford Mltor's engineer traveling expenses, local transportation, accommodation and catering cost.
MLT-DJ550F/W main configuration | |
Forward and backward travel range | 560mm |
Z axis travel range | 330mm |
Chamfering hole diameter | 1.2-6mm for feeding and 6-12mm for biomass pellet mill |
The minimal Ring die inner size | 350mm |
The maximal Ring die outer size | 1100mm |
Ring die width | ≤550mm |
Positional accuracy | 0.02mm |
Speed of main shaft | 0-3000rpm/1500rpm |
Main shaft power | 2.2kW |
Power requirement | 415V, 50Hz( can adjust) |
Main components | |
Lead screw with precision grade | Taiwan brand, 2 pieces |
Linear guiderail with precision grade | Taiwan brand, 4 pieces |
Mltor control system | including 3 sets of servo drive and motor |
Electric cabinet | Schneider component |
Hand wheel controller | Convenient for drilling control |
Ring die driving roller | 2pcs with heat treatment |
Cooling tank | Water pump and a lubrication pump |
Spare parts along with delivery | |
Proximity switch | 1 piece |
Magnet | 1 piece |
Anchor screw-M16*40 | 4 pieces |
Hex key-1.5-10 | 1 piece |
Rubber wheel | 2 pieces |
Featured products
-
8-spindles and 10-axis NC Control Ring Die Deep Hole Outer Drilling Machine for Pellet Dies
-
3-axis Flat Die Deep Hole Gun Drilling Machine for Seafood Pellet Mill
-
Mltor One Spindle and 3-axis of Flat Die Mold Drilling Machine for Feeding and Biomass Pellet Mill
-
5-axis and CNC Roller Shell Gear Hobbing Machine for Feeding Pellet Mill
-
Digital Pellet Ring Die Vertical Turning Lathe Machine, 2-axis of Mltor NC Control Equipment
-
Digital Flange Hole Keyway Milling Machine for 4Cr13 Pellet Ring Die
-
4-spindles and 6-axis NC Control Pellet Ring Dies Deep Hole Gun Drilling Machine for Biomass&Feeding Pellet Mill