Our Products
Contact Information
Qiao Li District ChangPing Town
Tel: 86-769-82200886
Fax: 86-769-81081781
thermal regulator dehumidifying dryer chiller
Model: KN-6KW 9KW 18KW
Category: Mold and Die Industry / Mold Processing Subcontracting / Machining
Characteristics
Heat carrier
Water, depending on unit design max. 95° C, 150° C, 160° C.
CARNO temperature controllers offer excellent performance combined with simple operation, e.g.:
• Simultaneous display of set-point and actual temperature.
• Fault display via flow diagram with LED display and an additional indicator in the display.
• Display of the inlet temperature, return temperature and differential temperature.
• Simple operation thanks to fully automatic function sequences.
• Self-optimization of the control parameters.
• Switchover to the 2nd set-point value, e.g. value 2 for production interruption.
• Control sensor selectable, inlet or return sensor
- Standard setting return sensor.
Safety
• Fault display
a) in the flow diagram
b) as LED display
c) via interface, e.g. to the injection molding machine screen display.
• Potential-free alarm contact for level, pump temperature, leakage and differential temperature faults.
• Set-point limitation.
• Temperature monitoring with alarm output.
• Unauthorized access to the programming levels protected against by coding.
• Phase failure monitoring.
• Sensor breakage monitoring.
• Short circuit monitoring with PT-100 sensors.
• Protection type IP54.
• Hose breakage monitoring:
For protecting the production system against water damage.
• Differential temperature monitoring by 2 sensors in the inlet, as fault and quality monitoring.
• Switchover to 2nd set-point value in the event of communication failure of the interface, for example to the injection molding machine.
Installation
The temperature controllers are supplied ready to connect, with a cable and ball valves. You can perform commissioning easily yourself.
Service
• Software update and transfer of control parameters via PC.
• Parameter administration by PC software.
- Special equipment, e.g. assignment of the control parameters in case of tool change for each new tool possible ? tool file ? for ensuring consistent quality.
Functions of the control and display elements
Specifications
Heat carrier
Water, depending on unit design max. 95° C, 150° C, 160° C.
CARNO temperature controllers offer excellent performance combined with simple operation, e.g.:
• Simultaneous display of set-point and actual temperature.
• Fault display via flow diagram with LED display and an additional indicator in the display.
• Display of the inlet temperature, return temperature and differential temperature.
• Simple operation thanks to fully automatic function sequences.
• Self-optimization of the control parameters.
• Switchover to the 2nd set-point value, e.g. value 2 for production interruption.
• Control sensor selectable, inlet or return sensor
- Standard setting return sensor.
Safety
• Fault display
a) in the flow diagram
b) as LED display
c) via interface, e.g. to the injection molding machine screen display.
• Potential-free alarm contact for level, pump temperature, leakage and differential temperature faults.
• Set-point limitation.
• Temperature monitoring with alarm output.
• Unauthorized access to the programming levels protected against by coding.
• Phase failure monitoring.
• Sensor breakage monitoring.
• Short circuit monitoring with PT-100 sensors.
• Protection type IP54.
• Hose breakage monitoring:
For protecting the production system against water damage.
• Differential temperature monitoring by 2 sensors in the inlet, as fault and quality monitoring.
• Switchover to 2nd set-point value in the event of communication failure of the interface, for example to the injection molding machine.
Installation
The temperature controllers are supplied ready to connect, with a cable and ball valves. You can perform commissioning easily yourself.
Service
• Software update and transfer of control parameters via PC.
• Parameter administration by PC software.
- Special equipment, e.g. assignment of the control parameters in case of tool change for each new tool possible ? tool file ? for ensuring consistent quality.
Functions of the control and display elements
Featured products
