Our Products
Contact Information
No.2-2, Shueitou Lane, Jiahou Rd, Waipu Township, Taichung County 438, Taiwan
Tel: 886-4-26836919
Fax: 886-4-26839900
Gentiger High Speed Milling Machining Center
Model: GT-66V
Category: Machine Tools / Machining Centers / Machining Centers, Vertical
Characteristics
Optimal Machine Structure
Specially designed T shape machine structure features superior rigidity. The width of column is the same as the base. The table is independently installed on base, and fully supported through the entire stroke, assuring maximum accuracy and dependability. Long term accuracy at high speed machining is assured.
Lifetime Accuracy
All castings are stress relieved and seasoning treated for long term accuracy and long service life.
Three Axes Ball Screws
Roller type linear guideways on three axes feature higher feedrate, resist heavier loads, ensure superior dynamic accuracy and a long service life.
High acceleration speed on 3 axes, X-axis 0.8G, Y-axis 0.9G, and Z-axis 1.0G. This outstanding design greatly reduces machining time while upgrading economical efficiency.
3 axes feedrate: rapid feedrate 30 m/min
Positioning accuracy: 0.003/300mm (Equipped with optical scale)
Repeatability: ±0.002MM (Equipped with optical scale)
Cutter balance should be calibrated to within G2.5
Specifications
MODEL T16P Y24A S36E
Max. spindle speeds15,000 rpm 24,000 rpm 36,000 rpm
Spindle taperBT-40 HSK-A63 HSK-E50
Spindle motor11/14.7 kw 18/23 kw 20/24 kw
Inner Dia. of spindle bearingØ70 mmØ65 mmØ50 mm
Bearing lubricationGreaseOil-Air Oil-Air
Spindle coolingOil-coolingWater-cooling Water-cooling
Distance from spindle center to machine front750 mm
Table area750 x 500 mm
T-slot 18 x 5 x 100 mm
Height of table from ground800 mm
Max. load of table (Average load)400 kg
Travel for X, Y, Z-axes720 x 500 x 400mm
Distance from table surface to spindle nose150~550 mm
Rapid feedrate30 m/min
Cutting feedrate20 m/min
Magazine capacity16
Max. tool length250 mm
Max. tool weight5 kg
Motor of tool magazine40 W
X, Y & Z axis servomotors5.1kw (X) / 4.2kw (Y & Z)
Air pressure requirement5-7 kgf/cm2
Air conditioner3 Amp
Spindle cooler7.2 Amp/3HP
Automatic lubricator (Slideways)150 W
Coolant motor0.5 HP
Total power consumption (Max.)40 KVA45 KVA45 KVA
Coolant tank250 liter
Packing dimensions (L x W x H)3200 x 2140 x 2550 mm / 870 x 700 x 1560 mm
Net weight6040 kg
Gross weight6935 kg
Featured products
