Show Info
Date: 2013/1/7-2013/1/10
Venue:
Dubai World Trade Centre
Organizer:
Al Fajer Information & Services
Messe Dussedolf
Featured Suppliers
- Fong Kee International Machinery Co., Ltd. Booth No : -
- Worldly Industrial Co., Ltd. Booth No : -
Reversible Rewinding Machine and Roll Inspecting Machine
Modeeel: FSE-1300-2
Industry: Plastic and Rubber Industry / Machinery for Processing Plastics / Plastic Slitting & Rewinding Machines
Supplier; Hci Converting Equipment Co., Ltd.
Booth No: -
Characteristics
※Unwinding Section
The left and right unwind arms are dived by motor; the operator can adjust the width freely.
Equipped with pressure chuck for clamp the parent roll quick and easy.
Adopted edge guiding system, the smoothest rewinding edge is ensured.
Equipped with unwind control panel, single operator is required to manipulate and load the parent roll.
Unwind is driven by servo motor with inverter providing the most accurate control.
The winding tension is sensed by load cell and compared to set tension. The control system will increases or decreases tension according to the calculated the tension difference automatically. It can maintain the stable tension output during whole operation.
※Slitting Section (Optional on FSE-2 Roll Inspecting Machine)
One machine with two functions: Install a trimming cutting unit for edges slitting.
Equipped with vacuum type trim disposal system. Specially designed ejectors with powerful ventilators remove the edge of web.
※Inspecting Section
Equipped with observed board and fluorescent lamps for visual checking.
Length memorized and auto reverse function.
※Rewinding Section
Rewind is driven by servo motor with inverter providing the most accurate control.
The rewinding direction can be changed in any time with forward / reverse jogging functions.
Equipped with pneumatic lay-on roller.
※Micro-computer Control System
Adopted with industrial micro computer providing the accurate and stable control.
10" LCD colorful touch screen and simple figure display for setting.
Unwind auto stop and material exhausted stop function.
Rewind tension auto increase function.
Winding directions reverse function.
Meter reached auto stop function.
50 Sets of parameters memory function
※Optional Accessories
1,000 width synchronic flash light:
Stroboscope for inspecting the defectives of the printed film.
Splicing table with pneumatic press-bar.
Trim cutting mechanism.
Statics eliminator.
CE mark approved.
Specifications
Specifications |
FSE-1300-2 Roll Inspecting Machine |
Mechanical Speed (m/min) |
0-250 |
Unwind Stand |
Shaftless with Pneumatic Chuck & Floating Type |
Unwind Core Inner Diameter (mm) |
76 / 3" or (152 / 6" Optional) |
Unwind Web Width (mm) |
320-1,300 |
Maximum Unwind Diameter (mm) |
800 |
Unwind Tension Control |
Servo Motor + Load Cell Sensor |
Web Guiding System |
Edge |
Trim Slitting Mechanism (Optional) |
Razor Cutting + Vacuum Type Trim Disposal |
Rewind Core Inner Diameter (mm) |
76 / 3" or (152 / 6" Optional) |
Maximum Rewind Diameter (mm) |
800 |
Rewind Tension Control |
Servo Motor |
Featured products
-
Slitter Rewinder Practical
-
Slitter Rewinder Superior
-
Slitting Machine Deluxe
-
Slitting Machine Standard
-
Slitter Rewinder Economical
-
Heating Side Sealing Slitter Rewinder
-
Reversible Rewinding Machine
-
Reversible Rewinding Machine and Roll Inspecting Machine
-
Rewinding Machine
-
Doctoring and Rewinding Machine