Our Products
Contact Information
Industry and Trade Park Zhaxi,Nantong City,Jiangsu Province China
Tel: 86-513-85563611
Fax: 86-513-85563680
Graphite anode plate
Model: HTB
Category: Automatic/Industrial Machines & Equipments / Chemical Industry Machines / Heat Exchangers
Characteristics
Graphite anode plate
iStructure and characteristicsj
Graphite anode plate is less carbon ash material preparation, after grinding, Kneading, shaping, baking, impregnation, and then more than 2500 J high temperature graphite resistance furnace, and another by mechanical finishing. Finished with a very good chemistry, physics and electrical conductivity, thermal conductivity performance. This production of large graphite anode plate may be in the electronics industry and other industries on the application.
Specifications Dimensions: Length: 1200 ~ 3000mm; width: 300 ~ 540mm; thickness: 40 ~ 120mm. Can also customize the size according to user requirements.
iPhysical and chemical indicatorsj
Project indicators
Resistivity ≯ 8.0g[ E m
Ash ≯ 0.3%
Bulk Density ≮ 1.65 g/cm3
Compressive Strength ≮ 30 MPa
Size ≯ 1 mm
iCautionj
1, before installation check to match the same production equipment.
2, the installation may not be in any part of the force plate tap to prevent the plate fracture.
3, the use of a certain period of time and found the plate surface after the possession of other miscellaneous items must be cleaned after use.
4, before the use of water-resistant cover transportation, transit light light take place, to prevent the impact of collision damage. Storage to avoid rain, snow, water wet.
Featured products
-
GH-Floating Tube Graphite Heat Exchanger
-
Graphite anode plate
-
STT type Graphite packing tower
-
YKX block-type round hole type graphite falling film absorber
-
YKch type graphite sulfuric acid dilution cooler
-
YKA round block hole type graphite heat exchanger
-
The JHT high efficiency graphite heat exchanger