Our Products
Contact Information
rm15,9/f,block A,hoplite industrial center,Wangtai Road,3-5,Hong Kong
Tel: 00-852-27390766
Fax: 00-852-21724998
TPU Adhesive extrusion Cast film machine
Model: FM-1600
Category: Plastic and Rubber Industry / Machinery for Processing Plastics / Other Plastic Processing Machines
Characteristics
This Machine can produce TPU Hot melt Adhesive film. It is with Hot melt Core technique (Without using Any Solvent while production) .It is extrusion system that is invented for replace un-enviromental friendly Solvent-based adhesive film machine / Traditional Scratch coating machine, It is Automatic, reducing Cost, Stable, able to Extrude evenlyIt Allows widely producing materials in 10-50M/Mins, It Saves Human and material resources.
Specifications
machine, It is Automatic, reducing Cost, Stable, able to Extrude evenlyIt Allows widely producing materials in 10-50M/Mins, It Saves Human and material resources.
|
適用塗膜樹脂：
|
TPU聚氨酯
PA聚酰胺 PES聚醚砜树脂 EVA乙烯一乙酸乙烯酯共聚物膠粒等等  |
|
工程速度：
|
10M/Min-80M/Min(最低速度至最高速度)，要根據聚氨酯系列熱熔膠各自化學性能而定
|
|
塗抹寬度：
|
1100/1300MM，可客戶定制
|
|
塗膜厚度：
|
0.015-0.18MM
|
|
塗膜厚度誤差：
|
≤+ - 5%
|
|
自動張力設定範圍：
|
3-30KG/全幅寬
|
|
最大擠出量：
|
120KG/小時
|
|
複合冷卻滾筒：
|
¢500X600
|
|
螺桿直徑：
|
¢90mm 長徑比 33：1
|
|
最大放卷直徑:
|
¢800mm
|
|
最大收卷直徑:
|
¢500mm
|
|
電機驅動：
|
擠出機75KW
|
|
整機總功率：
|
約200KW
|
|
機器重量：
|
約17000KG
|
|
外觀尺寸：
|
9000MM X 6800MM X 3250MM 長X 寬 X 高
|
|
機身顏色：
|
象牙白，熒光橙，危險標色
|
Code: FM-1600
Power: 3φ380V ≈187KW
Main motor power = 55KW
Finished sheet width ≤1600mm
Screw diameter = φ90mm
finished sheet thickness = 0.05-0.20mm
Speed≈10-50m/min
Unforming Roller = φ800mm
Forming Roller = φ500mm
Applicable materials = TPU/PA/PES/EVA Pallet
Featured products
