Our Products
Contact Information
Foshan Nanhai Shishan Science and Technology Industrial Park A District, Shishan Avenue (opposite Pe
Tel: 86-757-86691187
Fax: 86-757-27837570
Ultrasonic Cleaner
Model: SD-1004D
Category: Automatic/Industrial Machines & Equipments / Industrial Machines / Ultrasonic Cleaners
Characteristics
Ultrasonic Cleaning Machines principle:
Transducer by the ultrasonic signal generator and cleaning tank composed. The ultrasonic signal generator to generate a high-frequency oscillation signal, converted by the transducer into the tens of thousands of times per second, a high-frequency mechanical oscillations, and is formed in the cleaning liquid (medium) ultrasonic manner the high-frequency alternating positive and negative pressure in the The cleaning fluid density and white forward radiation propagation, so that the washing liquid and continue to produce numerous tiny air bubbles and continuously rupture, this phenomenon is called "cavitation effect". Bubble burst, high-voltage transient formation of more than 1000 atmospheres, to produce a series of explosions releasing tremendous energy, a tremendous impact on the surrounding, thus ongoing impact on the workpiece surface, quickly falling off the work surface and cracks in the dirt, so as to achieve the workpiece surface purification purposes.
Equipment characteristics:
A stainless steel structure, beautiful and durable;
2 Set up the level control system to ensure the normal working of the machine;
Equipped with automatic temperature control system, temperature control range: room temperature - 100 ° C;
4 fully sealed structure, reduce noise;
1, the ultrasonic generator
Digital display power, frequency;
Automatic frequency tuning, ultra long-standing stable and durable equipment
Power resizable
Imports of high-power FET CPI the circuit amplifies promote absolute super
High-power air plugs the feeder output device (cleaning tank)
Simple operation, press the power switch on the work
2, the transducer
The magnesium aluminate 7075 aluminum assembly
Japan imported mold steel feeder screws
Japan imported chips
Manufacture and installation of professional and technical
3, 5-10 year life of the ultrasonic cleaning tank
Whole stainless steel structure, durable
Domestic / imported anti-acid cleaning tank 304 stainless steel
To clean channel steel plate thickness of 2.0mm thickness
Installation placed formula cleaning bath, is not fixed, and between the fixing groove with a cushion rubber isolation, to reduce seismic energy consumption, and improve the cleaning efficiency.
Transducer installation process
a \ first transducer detecting a recording parameter and then select the transducer with the group using the error value is less than 100hz
insulation on the bottom of the transducer b \ Scrub washed with acetone, and then place the transducer chip paint, oven thermostat heating spare;
c \ cleaning tank welding feeder screws, screw around frosted, acetone wash;
d \ blowing hot with a hot air gun cleaning slot installed transducer, the use of imported AB glue wipe evenly in the bottom of the transducer parallel with a good spin on cleaning slot feeder screws tightened to a certain degree of tightening torque meter wrench .
Operational matters
1, cleaning equipment, should be connected to the grounding cable to ensure electrical safety.
2, the ultrasonic cleaning tank input line into the ultrasonic power source behind the control box output jack, and tighten the screw cap to ensure its good contact. (Integration models may dispense with this step) to the control box and cleaning slot power lines were connected to the power outlet.
3, to the cleaning groove, injecting the cleaning liquid to be applied, the liquid is about 5/6 of the groove depth cleaning press need to inject a suitable cleaning agent.
Note: The amount of cleaning fluid will affect the machine's operating frequency, the operating frequency is not the best when, will seriously affect the cleaning effect of the machine, see 6:00).
4, adjust the value of the temperature controller to the desired temperature (Note: the temperature of the washing liquid is not higher than 85 ° C, otherwise it will seriously affect the life of the transducer), then the heating power supply switch is placed in the "ON" position.
Note: no heating device of the apparatus may be omitted in this step.
5, is set to control the power of the tank opening on the "open" position, so that the ultrasonic power control box starting, when you can hear the ultrasonic cleaning tank generated harmonic sounds, the cleaning work has already begun.
6, the high-frequency high-voltage equipment, non-professionals do out of the box tuning and maintenance.
Contact:
Tel :0757 -86691187
Q Q: 472178201
Contact: Young Workers
E-mail: abc-tao@163.com
Company official website: www.sdcx.com.cn
Service Tenet:
Reputation and public praise, depend on the quality and development;
Service requirements:
Within 24 hours to provide services, to provide customers with the greatest degree of help and support;
Warranty Policy:
Equipment year warranty and lifetime maintenance. (Implementation of the warranty agreement)
Featured products
