Our Products
Contact Information
Via Selice Provinciale 17/A 40026 Imola (BO)
Tel: 39-542-607 111
Fax: 39-542-642 354
Continuous compression moulding machine for the production of plastic cap
Model: CCM48
Category: Packaging, Printing, Food & Pharmacy Machinery / Packaging Machinery / Beverage Packaging Machines
Characteristics
CCM48
CONTINUOUS COMPRESSION MOULDING MACHINE
No. of tools: 48
Output rate: 2.000 caps/minute
Cycle time: 1,44 sec
Type of cap: AB29W
Weight: 1,3 gr
Diameter: 29 mm
Type of resin: HDPE
Extruder capacity: 150 kg/h
Electrical power average consumption (for caps > 3 gr): 0,4 kWh/kg
Electrical power average consumption (for cap AB29W): 0,6 kWh/kg
Compressed air average consumption: 600 Nl/min [5 bars]
Specifications
Continuous compression moulding hydraulic press for the production of plastic caps. The manufacturing process lies in extruding the granulated compound (i.e. HDPE, PP), cutting it into single pellets, inserting it into the cavities, and finally moulding the cap according to a defined profile. The output of the machine strongly depends on the type of resin used, part design and part weight.
The machine is equipped with:
- melted compound by-pass valve for cleaning the extruder, for start-ups and stops of the machine
- pneumatic system with device for air injection into the upper moulds
- cooling system for temperature control of upper and lower moulds
- oleodynamic unit
- Sacmi PLC automation and control system
- in-phase cap extracting and transferring unit on motor-driven conveyor belt, allowing on-board installation of the vision system
- automatic rejection device for out of weight closures
Featured products
-
FORMSLEEVER+ LABELLING MACHINE
-
A series electro-mechanical fillers - E series electronic fillers
-
SBF ROTARY BLOW MOLDING for blowing PET preforms
-
IPS 220 - NEW PET INJECTION SYSTEM
-
CPB LINK - Automatic buffer for caps and preforms
-
Continuous compression moulding machine for the production of plastic cap