Our Products
- Industrial Robots & Accessories (7)
- Other Machinery (2)
- Peripheral Equipment for Automated Machinery (1)
Contact Information
11F.-5, No.88, Zhongshan Rd., Zhongli City, Taoyuan County 32041, Taiwan
Tel: 886-3-4275890
Fax: 886-3-4275913
High Power Zigbee RS-232 adapter
Model: ZA-H
Category: Automatic/Industrial Machines & Equipments / Automated Machinery & Equipments / Industrial Robots & Accessories
Characteristics
uConnect
Ubiquitous Connect
©2012 All rights reserved by Uconnect
Specifications:
1. Solution: TI CC 2530 + CC 2591 (High power)
2. Coverage: 300~500 m (High power) (The actual distance is depend on the real
environment and the antenna. For reference only)
3. Tx. Power: 18 dBm (High power)
4. Rx. Sensitivity (Nominal): -95 dBm (High power)
5. Baud Rate: Supports 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps
6. Connection: Point to Multi-points
7. UART Interface: TxD, RxD, GND, CTS/RTS
8. RS-232 Interface: D_SUB 9-pin female
9. Standard: 2.4 GHz IEEE 802.15.4 / ZigBee Pro Stack
10. Data rate: 250Kbps
11. Data Bit: 8 bit
12. Frequency: 2.4GHz~2.5 GHz
13. Modulation: DSSS
14. Antenna: SMA female + external dipole antenna
15. Antenna Impedance: 50 ohm
16. Power Supply: +5 to +6 V DC
17. Current Consumption: TX: 35.5 mA @ +4.5 dBm, RX: 24 mA
18. Operation Temperature: -20°C to +75°C
19. Dimensions: 88 mm (L) x 34 mm (W) x 15 mm (H) (BT-232B), Antenna: 11 cm
Remark: All contents are subject to change without notice.
Inquire the product: [email protected]
Features:
1. 3 in 1 firmware: Coordinator, Router and end Device
2. TI CC2530 + 2591, High power mode
3. Support Serial Port, Digital I/O and Analog Input interfaces:
4 Digital I/O:
Remote control logic high (MIN 2.4V), low (MAX 0.5V).
Output drives capability 20mA. , Max Voltage 3.3V.
5. Analog Input(ADC): Max Voltage 3.3V, 8bit- resolution
Applications:
1. Home automation, building automation
2. Cable replacement
3. SCADA system, Wireless sensor network, Internet of Things
4. Robot, unmanned carrier
5. PDA, POS, receipt printer, bar code reader, RFID, card reader
6. Power meter, Smart energy, Green power, LED light
Specifications
Specifications:
1. Solution: TI CC 2530 + CC 2591 (High power)
2. Coverage: 300~500 m (High power) (The actual distance is depend on the real
environment and the antenna. For reference only)
3. Tx. Power: 18 dBm (High power)
4. Rx. Sensitivity (Nominal): -95 dBm (High power)
5. Baud Rate: Supports 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps
6. Connection: Point to Multi-points
7. UART Interface: TxD, RxD, GND, CTS/RTS
8. RS-232 Interface: D_SUB 9-pin female
9. Standard: 2.4 GHz IEEE 802.15.4 / ZigBee Pro Stack
10. Data rate: 250Kbps
11. Data Bit: 8 bit
12. Frequency: 2.4GHz~2.5 GHz
13. Modulation: DSSS
14. Antenna: SMA female + external dipole antenna
15. Antenna Impedance: 50 ohm
16. Power Supply: +5 to +6 V DC
17. Current Consumption: TX: 35.5 mA @ +4.5 dBm, RX: 24 mA
18. Operation Temperature: -20°C to +75°C
19. Dimensions: 88 mm (L) x 34 mm (W) x 15 mm (H) (BT-232B), Antenna: 11 cm
Remark: All contents are subject to change without notice.
Featured products
