Our Products
- Other Machinery (10)
Contact Information
Rm. 5, 7F., No.16, Ln. 609, Sec. 5, Chongsin Rd., Sanchong Dist., New Taipei City 241, Taiwan
Tel: 886-2-29995186
Fax: 886-2-29994876
Conductive Plastic Potentiometric Position Transducers
Model: KPA1
Category: Machine Tools / Others / Other Machinery
Characteristics
With a housing just 18 mm wide, the KPA1 Series is designed for measuring applications in limited space.
The joint with up-take of slack and M4 threading provides greater tolerances in movement. Careful selection of the materials and high-quality components used in KPA1 potentiometers ensure consistent measurement and reliable operation throughout the service life of the sensor. Special designs with better linearities are available on request.
Specifications
KPA1 series |
Model |
10 |
15 |
25 |
50 |
75 |
100 |
125 |
150 |
175 |
200 |
225 |
250 |
275 |
300 |
Useful electrical stroke (A.E.) |
mm |
10 |
15 |
25 |
50 |
75 |
100 |
125 |
150 |
175 |
200 |
225 |
250 |
275 |
300 |
Resistance (T.E.) ±10% |
KΩ |
1 |
1 |
1 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
Independent linearity (within A.E.) |
+- % |
0.5 |
0.5 |
0.5 |
0.25 |
0.25 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
Mechanical stroke (M.T.) |
mm |
A.E.+3mm |
|||||||||||||
Resolution |
@ |
infinite |
|||||||||||||
Repeatability |
mm |
0.01 |
|||||||||||||
Electrical connections |
@ |
3 pole PVC cable or 4 pole connector output |
|||||||||||||
Displacement speed |
m/s |
≤ 5 (Standard) |
|||||||||||||
Protection level |
@ |
IP67 |
|||||||||||||
Life |
@ |
100x106 strokes |
|||||||||||||
Displacement force |
N |
1.2 |
|||||||||||||
Vibrations |
@ |
5 - 2000Hz, Amax =0.75 mm, amax. = 20 g |
|||||||||||||
Shock |
@ |
50 g, 11ms |
|||||||||||||
Recommended cursor current |
μA |
< 1 |
Max. cursor current |
mA |
10 |
|
Maximum applicable voltage |
V |
10 |
50 |
Electrical isolation |
MΩ |
>10 @ 500V, 2s, 1bar |
|
Dielectric strength |
μA |
< 100 @ 500V~ ,50Hz, 2s,1bar |
|
Actual Temperature Coefficient of the output voltage |
ppm/°C |
≤ 1.5 (typical) |
|
Working temperature |
J |
-60~+150 |
|
Material for transducer case |
@ |
Anodized aluminum Nylon 66 G 25 |
|
Material for pull shaft |
@ |
Stainless steel AISI 303 |
|
Mounting |
@ |
Brackets with adjustable distance between centers or with M4 screw |
Featured products