Our Products
Contact Information
1F., No.58, Yajiang St., Wanhua Dist., Taipei City 108, Taiwan
Tel: 886-2-2311-1047
Fax: 886-2-2331-9300
zinc paste
Model: 800℃ resistant
Category: Machinery Parts and Components / Machinery Parts and Components / Sheet Metal Enclosure Systems for Machine Tools
Characteristics
Zinc Paste
Technical data
Colour grey
Appearance when dry matt
Storage Temperature not over 50 °C
Zinc content in dry film 95 %
Zinc purness 98,5 – 99,7 %
Viscosity 60 s in a DIN 4 cup
Density 2,85 g/ml
Temperature resistance 800 °C
Dry film thickness 100 μm
Theoretical coverage with 1 kg 2 – 2,5 m2 if 100 μm dry film thickness
Surface preparation The surface should be dry and clean. Brush off
thick rust coverage. Oil, grease, dust, salt or any
other containment should be removed.
Application Stir before use,
Airless Spray: possible without solvent
drying time between several coatings: 5-8 min.
Rel. humility during application Up to 90 %
Drying Characteristics
Touch dry 10 min (20 °C)
Full cure 24 h (20 °C)
Overcoating 60 min (20 °C)
CB Chemie und Biotechnologie GmbH Berensweg 200 D-33334 Gütersloh
Tel: +49 5241 9443 0 Fax: +49 5241 944 344 www.cb-chemie.de feindt@cb-chemie.de
Zinc Paste Silver
Technical data
Colour silver
Appearance when dry bright
Storage Temperature not over 50 °C
Zinc content in dry film
Aluminium content in dry film
Ca. 21 %
Ca. 33 %
Zinc purness 98,5 – 99,7 %
Viscosity 280 mPa s
Density 1,09 g/ml
Temperature resistance 800 °C
Dry film thickness 30 μm
Theoretical coverage with 1 kg 15 m2 if 30 μm dry film thickness
Surface preparation The surface should be dry and clean. Brush off
thick rust coverage. Oil, grease, dust, salt or any
other containment should be removed.
Application Stir before use,
Airless Spray: possible without solvent
drying time between several coatings: 5-8 min.
Rel. humility during application Up to 90 %
Drying Characteristics
Touch dry 10 min (20 °C)
Full cure 24 h (20 °C)
Overcoating 60 min (20 °C)
Specifications
Versatile Products
Bio-Chem Zinc Paste and Bio-Chem Zinc Spray are ready mixtures containing 95 % pure zinc in the dry film. As long term corrosion protection agents there are suitable for all metal surfaces.
Properties
Bio-Chem Zinc Paste and Bio-Chem Zinc Spray are universally applicable in industry and workshops. The main advantages of the both zinc products are the following:
* Painting-over without priming: no burning
* High electric conductance, especially
suited for spot welding
* High resistance to salt, water and rust
* Temperature resistance up to 800°C
Long-Term Corrosion Protection
High-quality ingredients gurantee an excellent adhesion of the Bio-Chem Zinc Paste and Bio-Chem Zinc Spray on metal surfaces. This cause an optimal corrosion protection. In addition the both Bio-Chem Products offers a double protection against corrosion:
1. Protection against the formation of cracks by a synthetic resin layer.
2. The zinc gives the metal surfaces a cathodic protection against rust.
Economical Use
Bio-Chem Zinc Paste and Bio-Chem Zinc Spray are quick-drying and water resistant after 15 minuntes. This reduces time and costs.
Zinc Paste
Zinc Spray
* Double long-term corrosion
protection for all metals
* Versatile and effective
* Fast drying
Areas of Application
Bio-Chem Zinc Paste and Bio-Chem Zinc Spray are applicable:
* for all corrosion protection works
* for repairing hot-galvanized surfaces
* for coating, drilling and weld joints
* as conductance layer for spot welding
* as priming for all building which are water
and weather endangered.
Usage
Clean the surfaces from grease, oil, rust and dirt.
Bio-Chem Zinc Paste:
Stir up the Bio-Chem Zinc Paste, apply or spray with airless devices on the surface. In case of several coatings keep drying time of 5 - 8 minutes.
Bio-Chem Zinc Spray:
Shake well before use. Spray cross- wise from 25 - 30 cm distance. Repeat the process after drying if necessary.
Featured products