Our Products
- Steel (Iron) Sheet/Coil Slitting Machines (2)
- Automatic Assembly Machines (2)
- Whirling Machines (1)
- Steel Sheet/Coil Leveling & Shearing Machines (1)
- Inspecting/Measuring Instrument and Parts (1)
- Air Pollution Control Equipment (1)
- Dust Collectors (1)
- Cleaning Machinery and Equipment (1)
Contact Information
No.2-3, Gongcuo, Bade City, Taoyuan County 334, Taiwan
Tel: 886-3-3754448
Fax: 886-3-3757754
COPPER FOIL INSPECTING REWINDING MACHINE
Model: LS-016
Category: Automatic/Industrial Machines & Equipments / Special Machine Tools / Steel (Iron) Sheet/Coil Slitting Machines
Characteristics
slit, cut at the same time, reduce the waste of employee and transporting time, improve capacity effective, high non defective rate.
Special cutting knife system: without wave on edge, little powder
Time meter belt drive design, oil free, without oil pollution, flat finished product
Mechanical space rate control: it can operate placidly and not cause buckling with material.
Absolute tension control with each rewinding axis: rewind tidily, symmetrical tension, easy operation.
Chart controlling operation, it can display inspected abnormality and eliminate fault
Auto buckling adjusting advice
Large full-color operator-machine controlling monitor
Air pressure batten type material rewinding axis. Any rewinding sleeve is not needed. Speed, easy unloading
Auto rewinding axis exiting device, easy to load or unload, lower noise, absolute motor control, Time meter belt drive design, lower operating noise (less than 75 dB)
Specifications
Mechanical speed: 15 ~ 80 M/Min
Weight of raw material: Max. 2000 kg
Width of raw material: Max. 1400 mm
Shaving width: 900 ~1400 mm
Rewinding diameter: 300 mm]upper/lower axis+ four alburn axis^
Raw material speed control: ultrasonic diameter inspection + space rate control
Rewinding speed control: absolute speed control for each axis (upper/ lower axis+ four alburn axis)
Rewinding tension control: fullyautomatic tension control for each axis control (upper/ lower axis+ four alburn axis)
Shaving cutting tool control: auto control row knife by servo
Anti- buckling device: electric adjustment
Raw material slack-side adjustment: electric adjustment 5 X
The raw material opposite side controls: photoelectric inspection and opposite side automatically with servo
Personnel operation method: front and back full-color PLC operator-machine controlling monitor.
Rewinding length account: The calculator counts setting, shut down automatically for set length (count for top and bottom axis independently)
Purchase on selection:
Copper coil feeding system
Fullyautomatic stocking and reloading system
Dust removing system
Glue wheel or particle terminator (non contact) system
CCD CCD surface inspection system
Material rewinding device: collect reminded copper coil after slitting.
Featured products