Our Products
- Steel (Iron) Sheet/Coil Slitting Machines (2)
- Automatic Assembly Machines (2)
- Whirling Machines (1)
- Steel Sheet/Coil Leveling & Shearing Machines (1)
- Inspecting/Measuring Instrument and Parts (1)
- Air Pollution Control Equipment (1)
- Dust Collectors (1)
- Cleaning Machinery and Equipment (1)
Contact Information
No.2-3, Gongcuo, Bade City, Taoyuan County 334, Taiwan
Tel: 886-3-3754448
Fax: 886-3-3757754
SUS-PLATE BRUSHING MACHINE
Model: LSRP-520
Category: Automatic/Industrial Machines & Equipments / Industrial Machines / Cleaning Machinery and Equipment
Characteristics
Perfect polishing effect
Three-dimensional brushing system can clean surface of sus-plate strongly, about 2m/m of centrifugal effect prevents steel plate from damage n the meantime of deep cleaning
It adopts 350 m/m of high efficiency brushing wheel suit of West Germany, which has strong brushing ability and can clean two faces of steel plate at the same time.
High stability: surface of steel plate is more ruder after several times of brushing, and has 100% of dryness.
Original wind knife system can increase dryness of surface of steel plate and ensure no hydrosphere remains on steel plate, as well as improve GOOD rate and decrease power cost at the same time of reducing bad appearance of oxidic and PD. it can ensure that no bead or drop marks remains if link speed is more than 40M/Min.
Outer reduced reducer, constant velocity joint slack make brush have perfect solidness, and ensure that on feeling to concussion of desk if locates at 1M away from it.
Lower power cost
It does not need to be dried by heating with electro heating or heat medium, which can save lot of electric cost compared with traditional drying mode. As well as can save power and protect environment synchronously
Easy operation: PLC programmer controllable operator-machine interface allows inspecting abnormality momentarily
Low maintenance cost: it only needs to be operated by one personnel after startup, so maintenance of it is vile. It needs to be heavy repaired every two years, but only wore material, such as axis needs to be replaced.
Non-dust transportation:
Wheel tool of drying system adopts inward anti-static wheel of Japan, which can prevent steel plate from secondary pollution from
No damage with steel plate
Germany brushing wheel brushes surface of steel plate softly while not cause any damage with it. Adjust brushing space in electric mode reliably and precisely
No static: no static is created to impact lay-up quality in the full producing process, and static club is not needed.
No pressure damage
Transport without pressure, in transporting process of steel plate, no abrasion of wheel tool or grain damage is created.
Pure wind: special multi-arrangements fresh wind cycling system, 0.5µ cleanliness of HEPA air flow achieves 99.8%, which ensures that wind knife blows out non-dust air flow
Water saving
Pure water cycling system adopts multiple filtration, which has the character of inspecting and alarming abnormality of flux and monitoring feeding water automatically, as well as easy to maintain.
Brushing wheel can be assembled and disassembled in suit. And two personnel can finish the process rapidly.
Specifications
Producing speed: 35~55 M/ Min(frequency conversion and adjustable)
Brushing system: three-dimensional brushing system
Brushing wheel: 350 m/m of high efficiency brushing wheel suit of West Germany
Dry system: 3 suits of strong effect wind knife system
Pure water filtrating system: exact multiple pure water cycling and filtrating system
Air filtrating system: multi-arrangements fresh wind cycling and filtrating system
Temperature: 40J]temperature for putting steel plate into non-dust room^
Operating interface: PLC operator-machine interface
Effective width range: 600P ~ 1300 P
Thickness of sus-plate: 1.0 ~ 2.5P
Size of sus-plate: width:20~45Alength :26~51(manufactured according to specification of customers)
Operating altitude: 900~1200P (manufactured according to specification of customers)
Lower noise: Noise is lower than85dB
Length of equipment: 4500P] it can be manufactured according to refluxing length and space^
Featured products