Our Products
- Grinding & Finishing Machines (1)
- Tube (Pipe) Bending Machines (1)
- Pipe & Tube Cut-Off Machines (1)
- Hydraulic Automatic Machines (1)
- Others (1)
Contact Information
humen
Tel: 86-027-88303556
Fax: 86-027-88303556
Sawblade Sharpening Machine
Model: JC-450B
Category: Machine Tools / Grinding Machines / Grinding & Finishing Machines
Characteristics
New design
1. After many years of local well-designed, is a professional-grade saw blade grinder.
2. New design, based on the position of the operator designed grinding machine, under all of its adjustments are done with a reasonable, so that the operator can easily adjust the cutting angle serrated, backlash angle, tooth depth, and saw-tooth Therefore, fast and accurate can be a sharp saw blade grinding.
Cam profile
1. Through sophisticated computer simulation, the design of industrial-class professional profile cam, so that your saw blade grinding more simple, quick and accurate.
2. Wheel head can swing up and down, so there would be no need to replace the grinding wheel, grinding to a chamfer.
3. Promote the claw end of welding have tungsten carbide, can feed claw wear and tear to a minimum, in order to achieve accurate feed.
4. This machine are all cast iron spherical graphite cast iron (FCD-45), and by tempering to ensure accuracy and increase the wear resistance.
5. SKD11 main components are high-carbon steel and heat treatment by grinding.
6. Push the spring arm improved, the use of rotary spring, it is not easy fatigue flexible to ensure that accurate feed.
7. Saw blade into the shaft to support the Block, the use of high-strength copper alloy for the substrate, high technology manufacture of embedded solid lubricant, the high-load, anti-abrasion characteristics of a more complete without the feature.
8. The use of feed axis F 30mm, axis and the increase of heat treatment and grinding.
Specifications
Blade diameter 50 ~ 450mm 65 ~ 450mm 35 ~ 450mm
The largest the largest 25mm pitch 25mm
8mm 8mm deep tooth
8mm thickness 8mm blade following the following
Grinding speed of 45 ~ 180 teeth / min 70 teeth / min
Cutting angle 0 ° ~ 30 ° 0 ° ~ 30 °
Wheel specifications F 70 × F 150 F 150 × F 25mm
Wheel speed 3800/4500RPM 3800/4500RPM
1/4HP 1/4HP Wheel Drive
1/2HP 1/4HP Drive Motor
Packing size 750mm × 750mm × 1380mm 550mm × 700mm × 550mm
NW / GW 145/200Kgs 92/150Kgs
The work of a light one
Kit 1 set 1 set
Dividing a disk 1
Manual 1 minute 1 minute
Wheel 5
Featured products