Our Products
- Dehumidification Wood Dryer (2)
- Hot Press Lumber Composer (2)
- Veneer Reeling & Unreeling Machines (1)
- Hot Press (1)
- Double Sizer (1)
- Lumber Core Composer (1)
- Glue Spreader (1)
- Other Woodworking Machines (1)
Contact Information
6 F-2 NO.680 Wen Tsu Road Zuo Ying District Kaohsiung Taiwan
Tel: 886-7-3739888
Fax: 886-7-3739688
Semi-Auto Block Board Composer
Model: HS-NAN-8
Category: Woodworking Machinery Industry / Veneer & Plywood Manufacturing / Lumber Core Composer
Characteristics
1.8’Semi Automatic Block Board Composer is designed for the mass production woodworking factory
located at cheap labor cost area.
It is different with another model of our products “8’ Automatic Block Board Composer”&”16’ Automatic
Block Board Composer”
2.The first procedure of operation is to load the glued and arranged strips, just one piece of
board’s quantity at a time, into feeding magazine. There strips will be pressed down gently
by pneumatic bar, and then pushed into horizontal heating zone by hydraulic push bar.
3. A solid steel plate is provided on the base of machine to insure stable condition under
operation and easy installation.
4.Pushing (feeding) speed is adjustable. The maximum is 45 strokes per minute.
5.The locators, 6’, 7’, and 8’, erected in feeding magazine, can position the length of product.
Mean while, a circular saw will cut the over length strips. The rest strips can be used again!
6.Both upper and lower steam heaters are made of thickened, heat-treated, and planed steel
plates, which will not be distorted after a long time of usage. The face of steam heater is
extra wide to insure producing smoothly and stably.
7.There are four individual hydraulic pillars, which can lift the upper steam heaters.
Therefore, the gap between upper and lower steam heaters can be adjusted separately,
according to the thickness of product.
8.Keeping the best contact between steam heaters and strips, the springs are provided on the
back of upper steam heater each.
Specifications
DESCRIPTION |
HS-NAN-8 |
Length of product |
1,880∼2,514mm(6’, 7’, 8’) |
Strip thickness |
8∼25mm |
Strip width |
35∼50mm |
Motor for oil pump |
10HP×4P, 1 Set |
Motor for circular saw |
5HP×2P, 1 Set |
Power |
10.5Kw |
Steam pressure |
3∼7Kgs/cm2 |
Compressed air |
5.0Kgs/cm2, necessary |
Max. Pushing speed |
45 strokes/min. |
Hydraulic control system |
1Set |
Pneumatic control system |
1Set |
Electric control system |
1Set |
Upper steam heaters |
130×130×4,000mm×17Pcs |
Lower steam heaters |
130×130×3,715mm×17Pcs |
Consumption |
70 Kgs/hr |
Machine size |
5,420×3, 260×2,050mm |
Net weight |
Approx. 7,000Kgs |
Gross weight |
Approx. 7,500Kgs |
Featured products