Our Products
Related Products
-
Advanced PCI Master Card with 4-Axes Motion Control Card
Model: PCI-M314A1/B1
-
Screw Terminal Motion.NET Digital Input/Output Slave Module
Model: 106-D440/D422/D404
Contact Information
No.8,Keyuan 1st Rd.,Xitun Dist.,Taichung City 407751, Taiwan, R.O.C
Tel: 886-4-25677670
Fax: --
1-Axis Motion.NET Motion Slave Module
Model: 106-M151/M161
Category: Automatic/Industrial Machines & Equipments / Automated Machinery & Equipments / Automatic Control Systems
Characteristics
¡EDIN rail mounting (L-124 x W-72 x H-53 mm)
¡EMax. 20Mbps transfer rate
¡EMax. 6.5Mhz, 1-Axis pulse output
¡E28 bits counter for incremental encoder
¡EProgrammable acceleration and deceleration time
¡ET-curve and S-curve velocity profiles support
¡EChange speed/position on-the-fly
¡ESimultaneously start/stop on multiple motion control modules
¡EEasy installation with RJ45 phone jack and LED diagnostic
¡EEasy installation for servo or stepping motor driver
Specifications
¡ESeries interface: Half duplex RS-485 with transformer isolation
¡ECable type: CAT5 UTP/STP Ethernet cable
¡ESurge protection: 10KV
¡ETransmission speed: 2.5Mbps,5Mbps,10Mbps and 20Mbps
¡EProgrammable Pulse output mode: ±OUT/DIR, ±CW/CCW, ±A/B phase
¡EProgrammable pulse command speed: Max 6.5Mpps / Min 0.05pps
¡EPosition range: 28 bits (±134,217,728 pulses)
¡EHome return mode: 13 types
¡EVelocity profiles: T-curve, S-curve
¡ECounter for encoder feedback signals: 28bits up/down
¡EPosition latch input: LTC
¡EPosition compare output: CMP
¡EIncremental encoder input: ±EA, ±EB
¡EEncoder index signal input: ±EZ
¡EMachine interface: PEL, MEL, ORG, SLD
¡EServo driver interface: ALM, RDY, SVON, INP, ERC
¡ESimultaneous start/stop motion input: STA, STP
¡ELED indicator: PWR, RUN, ERR, PEL, MEL, ORG, SLD
¡EPower supply: +18V DC to +30V DC, consumption: 3W typical
¡EWorking temperature: 0 to 60¢J
¡E106-M1A1-DA2S0
1-Axis motion slave module for Delta A2 series driver
¡E106-M131-MJ3S0
1-Axis motion slave module for Mistubishi J3 Series driver
¡E106-M141-YS5S0
1-Axis motion slave module for Yaskawa Sigma-II/¢½servo driver
¡E106-M151-PMAS0
1-Axis motion slave module for Panasonic Minas A/A4/A5 Series servo driver
¡E106-M161-GENS0
1-Axis motion slave module for Servo or Stepping driver
¡ECAB-S1133-500C¡ACAB-S1133-101C¡ACAB-S1133-201C
SCSI 50 pins cable, 0.5m/1m/2m length
¡ECAB-S2331-500D¡ACAB-S2331-101D¡ACAB-S2331-201D
SCSI 50 – 2* SCSI 20pins cable, 0.5m/1m/2m length (106-M151-PMA for Mistubishi J2S Series Driver)
Featured products