Our Products
- CNC Vertical Milling Machines (1)
- Heavy-duty Double-Column Milling Machines (1)
- Machining Centers, Vertical (1)
Contact Information
No.40, Ln. 540, Sec. 1, Shenlin Rd., Daya Dist., Taichung City 428, Taiwan
Tel: 886-4-25676267
Fax: 886-4-25675767
Double column high speed graphite machine center SD600G
Model: SD600G
Category: Machine Tools / Milling Machines / Heavy-duty Double-Column Milling Machines
Characteristics
A high speed milling and dust solution integrating SISTER's graphite machine center integrated a low temperature high speed dry cutting with super strong suction system .
It's available in graphite material cutting.
A dry cutting system make sure dust easy collection , non- environment pollution problem.
A strong negative dust suction system with close full guard to prevent dust leak off and keep health of the operator.
To installed the plus minus device in the electric system high speed machine controller.
High speed machine controller with high speed cutting function to keep face accuracy for the work piece during cutting
All axes are completely covered with telescoping guide way preventing damage to ball screw.
Air pulse-jet cartridge cleaning system
Specifications
|
Model |
Unit |
SD600 |
Control |
CNC controller |
|
Intek/Mitsubishi/Fanuc |
Travel { |
X x X-axis/Y x Y-axis/Z x Z-axis |
mm |
600/600/320 |
Table top surface to spindle nose |
mm |
80~400 |
|
Linear Guideway type (X/Y/Z) |
mm |
45/45/45(THK-Ball type) |
|
Ball screw(X/Y/Z) |
mm |
∅40/ ∅40/ ∅40 |
|
Table u@x |
Table work surface area (X-axis x Y-axis) |
mm |
600x600 |
T-Slots (Size x Number x Centre) |
|
18x4x150 |
|
Max. work piece weight |
Kg |
500 |
|
Feed rate t |
Rapid traverse rate X/Y/Z |
m/min |
20/20/20 |
Cutting feed rate |
mm |
1-15000 |
|
Minimum input Increment |
mm |
0.001 |
|
Spindle Db |
Spindle holder |
|
HSK-E40 |
Spindle motor |
Kw |
4.6 |
|
Spindle speed |
rpm |
24000/30000 |
|
Cooling Lubrication |
|
Oil/Grease |
|
A.T.C Mw |
Tool magazine capacity |
T |
24 |
Max. tool weight |
Kg |
1.5 |
|
Max. tool length |
mm |
150 |
|
Tool selection |
|
Armless |
|
Motors AF |
X-axis drive motors |
kw |
3.5 |
Y-axis drive motors |
kw |
3.5 |
|
Z- axis drive motors |
kw |
3.5 |
|
Others L |
Power |
KVA |
20 |
Pneumatic pressure |
Kg/cm² |
6 |
|
Cutting pump |
HP |
3/4 |
|
Coolant tank capacity |
L |
250 |
|
Net weight |
Kg |
6500 |
|
Floor space |
mm |
2200x2700x2650 |
Motor F |
HP |
7.5HP TEFC |
Air Flow yq |
|
2500FT³ ³/min |
Negative pressure t |
In/H2O |
1.26 |
Max. negative pressure ̤jt |
in/H2O |
11.5 |
Inlet Jf |
|
8”x 1 holes |
Including o |
mm |
∅600mm x 600 |
Machine floor space (L/W/H) xan |
cm |
275 x 220 x 265 |
Collector floor space (L/W/H) оn |
cm |
120 x 120 x 260 |
Featured products