Our Products
Contact Information
No.56, Sec. 1, Jinma Rd., Changhua City, Changhua County 500, Taiwan
Tel: 886-4-7388166
Fax: 886-4-7387099
Machining Center
Model: TBV-1100
Category: Machine Tools / Machining Centers / Machining Centers, Vertical
Characteristics
Rigid Machine Structure
The rigid machine structure is an optimized equilateral triangle design. Provided with 8-16 adjustment bolts (varied with models) for sufficient support points and ensuring machine stability for heavy loads.
Axes travels are transmitted by high precision ball screws to achieve excellent dynamical leveling. The load is fully supported by slide ways. The Y-axis has 4 ways as standard equipment.
The rigid base with uniform load distribution and massive construction creates a stable support. Machine accuracy is not affected by variation of foundation or leveling.
Box ways on 3 axes are hardened and precision ground. All way surfaces are precision scraped and coated with TURCITE-B. An automatic forced lubrication system is applied to increase slide ways accuracy and service life.
Z-axis equipped with a counter- balance weight, providing smooth motions for headstock rapid traverse and micrometric feed.
3 axis ball screws are directly driven by servo motors to eliminate backlash.
Fully Enclosed Way Guide; well protected slide ways prevent coolant and chip chips from entering. This feature provides safely guard for slide ways and extends the machine life.
Uniform lubrication points on slide ways. The machine employs a volumetric lubricator for consistent oil flow to each point, assuring a uniform lubrication effect an each slide way.
Class C3 ball screws on 3 axes are pretension to eliminate backlash and thermal elongation that provides outstanding positioning and repeatability accuracy.
Specifications
Description |
Unit |
TBV-1100 |
|
TABLE |
Controller |
- |
0i-MD |
Table Size |
mm |
1300x600 |
|
T-slots(size x number x pitch) |
mm |
18x5x125 |
|
Max. load capacity |
kg |
1000 |
|
TRAVEL |
X-axis travel |
mm |
1100 |
Y-axis travel |
mm |
610 |
|
Z-axis travel |
mm |
610 |
|
SPINDLE |
Distance from table surface to spindle nose |
mm |
120-730 |
Distance from column cover to spindle center line |
mm |
660 |
|
Spindle motor (cont/30min) |
KW |
11/15 |
|
Spindle speed |
rpm |
50-8000 (10000/12000 OPT) |
|
Spindle taper |
- |
BT 40 |
|
Servo motor of X,Y,Z axis |
KW |
2.5/2.5/2.5(OPT.4/4/4) |
|
MOTOR |
Lub. motor |
W |
25 |
Coolant motor |
W |
560 |
|
Flash motor behind table |
W |
1770 |
|
FEED RATE |
Rapid traverse (X/Y/Z) |
m/min |
18/18/15(OPT.24/24/15) |
Cutting feed rate |
mm/min |
10000 |
|
A.T.C |
Tool storage capacity |
pcs |
24 (Arm Type) |
Max. tool size (with adjacent tool) |
mm |
Ø 80 |
|
Max. tool size (without adjacent tool) |
mm |
Ø150 |
|
Max. tool length |
mm |
300 |
|
Max. tool weight |
kg |
7 |
|
Tool to tool |
sec |
1.6 (60HZ) |
|
Chip to chip |
sec |
7 (60HZ) |
|
ACCURACY |
Positioning VDI 3441/JIS 6338 |
mm |
X:0.012, Z:±0.004 / 300 |
Repeatability VDI 3441/JIS 6338 |
mm |
X:0.01, Z:±0.003 |
|
COOLANT |
Coolant |
L |
485 |
OTHER |
Air pressure |
kg/cm |
6-8 |
Electric power consumption |
KVA |
30 |
|
Machine weight |
kg |
7800 |
|
Machine dimension (LxWxH) |
mm |
2200x3100x2800 |
Featured products