Specifications

　     Power Condition:

The Working Capacity(About)               3kw / set

Total Line-In Cable Bronze Core            ≥6mm² (For Each Loom)

Standard Electric Voltage                      380V / 3P / 60Hz

Allowed Tolerance                                -5%-10%

2.1      Water And Compressed Air Is Not Necessary For Operating The Machine

2.2      Compressed Air Is Required To Clean And Maintain The Machine

2.3      Environment:

Maximum Temp. Of Workshop              40^oC

Height Above Sea Level                        <2800 m

**    The Machine Should Be Installed In The Dry Workshop Without Dust

BASIC ENGINEERING

Machine drawing, Layout drawing, Piping drawing, Electrical drawing etc. Will be provided within one month after agreement confirmed.

ELECTRICAL CABLES

01.        All of the cables and wires in and between the machine to its own electrical cabinets are included.

02.        The cables between the loom cabinets and the general power station provided by the buyer.

TECHNICAL DATA

01.        Number Of Shuttles                                  6 pcs

02.        Lay-Flat Width Of Cloth                            450-800mm

03.        Number Of Warp                                      720pcs

04.        Weft Density                                            8-16pcs/inch

05.        Shuttle Revolution(Max.)                          150r/min

06.        Driving Main Motor                                  3kw

07.        Specification Of Bobbin                            Ф35X218mm

08.        Max. Diameter Of Weft Bobbin                  Ф115mm

09.        Warp Control                                           Automatic Stop When Warp Break

10.        Weft Control                                            Automatic Stop When Weft Break Or Finish

11.        Lay-Out Dimension                                   10386×2800×2770mm

SPARE PARTS LIST (FOR ONE UNIT)