Specifications

1)        WORKING ENVIRONMENT

1.1      Power Condition

The Installed Capacity                                       115kw

Total Line-In Cable Bronze Core                        ≥75mm²

Standard Electric Voltage                                  380V / 3P / 50Hz

Allowed Tolerance                                            -5%-10%

1.2      Air Condition:

Air Working Pressure                                       ≥6-7bar         

Allowed Tolerance                                            ±1Bar

Total Air Supply                                               0.4m3/min

1.3      Water condition:

Total Water Supply                                           >0.6 m3/min

Water Pressure                                                 3-5Bar

Ph Value                                                          7.0-7.8

Hardness                                                         12dH

Tolerance                                                         ±1Bar

Inlet Temp.                                                      18-22^oC

1.4      Environment:

Maximum Temp. Of Workshop                          40 oC

Height Above Sea Level                                    <2800 m

2)        TECHNICAL SPECIFICATION

¨             Main Parameter                                          

Model                                                                    SJFM-Z70-800

Laminating width（mm）                                        350-750（mm）

Laminating thickness                                               0.012-0.05mm

Laminating linear speed                                           20-100m/min

Screw diameter                                                       Ø70×33

roller length                                                            900mm

die lip width                                                           900mm

Max. unwinding diameter                                         Ø1000mm

Max. winding diameter                                            Ø1200mm

Spec of core                                                           Ø88.5(ID)×Ø4 mm(steel)

¨             Main Parameter Of Extruder          

Screw

Screw diameter                                           Ø70mm

Screw L/D                                                  33:1

Screw Material                                            38CrMoALA

Screw Revolution                                        20-100 rpm

Output (Max)                                              120kr/hr

Barrel

Barrel Material                                            38CrMoALA

Barrel Heating Power                                  5 Zones×4.5 Kw=22.5 Kw

Heater Type                                                Cast Aluminum Barrel Heater

Temperature Control                                    PID

Hopper 

Hopper Material                                          Steel

Hopper Loader                                            Suitable For Granulates Vacuum Auto Suction

Auto Alarm When Short Of Material.

Hopper Capacity                                         Suitable For Extruder Capacity

Drive system

Driving Motor Power                                  37Kw AC Inverter Control

Gear Box                                                    250 Type

Filter

Heating Power                                            10.8kw

Filtering Way                                              Long Life Filter, Manual Change

Filter Net Spec.                                           80 mesh           

T-Die

T-Die Type                                                             Flat Film Die

Die Configuration                                       T- Type

Die Heating Type                                        Stainless Heating Pipe, Inner Heating

Die Material                                               5CrMoMn

Die Lip Width                                             900mm

Dia. Lip Opening Range(mm)                       0.3-1mm

Dia. Adjusting System                                 Manual Adjustment

No. Of Temp. Control Zone                          8 Zones

Die Heating Power                                      20kw

Adjusting Plug Width                                  200mm (Each Side)

Block Width Way                                        Inside Blocking

Jointer Heating Power                                 1 Zone 4.2kw

Extruder Moving Type

Moving Type                                              Moved By Motor

Adjusting Parameter                                                Adjusting The Forward/Back

¨             Unwinder For PP Woven Fabric PP

Unwinding Way                                          Stable Double Working Position

Max. Unwinding Width                                800mm

Max. unwinding Diameter                            Ø1000 mm

Unwinding Core                                          Ø88.5(ID)×4mm(thickness)

Correcting Way                                           EPC

¨             Main Parameter Of Laminator

Laminating Linear Speed                              20-120mm

Roller Length                                              900mm

Main Cooling Roller Diameter                      Ø400mm

Surface Treatment Of Chill Roll                   Mirror Or Matt Surface

Main Cooling Roller Rotating Joint               HD50

Silicone Roller                                            Ø315mm

Silicone Roller Rotating Joint                       HD40

Driving Motor Power                                  5.5kw AC motor, Inverter Control

¨             Edge Trimmer                                 

Edge Trimming Way                                   Cutting By Knife, the waste Blowing Collection                              

¨             Winder                                                                   

Winding Way                                              Two Working Position

Max. Winding Diameter                               Ø1200 mm

Max. Winding Width                                   850 mm

Winding Motor                                           AC Motor Inverter Control

3)        ELECTRONIC COMPONENTS LIST